I-BF001 Series Instructions

To change the unit of measurement between kg (kilograms) or lb (pounds), simply change your preferred unit of measurement in the INEVIFIT APP. You can do this by going into the settings menu (button on the top left of the home page) and then selecting between pounds or kilograms.

If you wish to calibrate your scale, please follow the steps below;
1. Place the scale on a hard and level surface.
2. Briefly step on and off of the scale so that "0.0" is displayed on the scale.
3. The scale is ready for use!
*If the scale does not turn on, please make sure you are stepping on it with enough force as it requires at least 10 lbs (4.5 kgs) to turn on.

If you are having issues connecting your scale to your phone, first verify you have the INEVIFIT app.
Make sure you have Bluetooth enabled.

For iPhone users, check in the settings on your phone under Privacy then Bluetooth, to ensure that Bluetooth is enabled for the app.

For Android users, ensure that location tracking is enabled while the app is in use.

NOTE: You do not connect the scale by searching for Bluetooth devices on your phone, it is only done in the app.
*If you are still encountering issues, please contact support for further assistance.

You can have an unlimited number of users that use one scale to track their weight & body composition. Please note that there are two options for this;
-Users can use the same smartphone and create their profile on one device by tapping on the profile icon and then clicking on the "New User" button.
-Alternatively, each user can download our FREE INEVIFIT app and use their own smartphone to monitor their progress.
*Either way there is no limit to the number of users.

If you would like to connect your scale to Fitbit, please do the following;
-Open the INEVIFIT app and go to the settings page by selecting the menu button located at the top left of the home page.
-Click on the Fitbit toggle to enable the connection.
*Note: This will guide you to your Fitbit sign-in page to sync your accounts.

If you wish to export or share your data from the INEVIFIT app, simply go into the history tab located at the top right of the home page. Then click on the sharing arrow located on the top right of the history page and you will be able to email the last set of results in text format to anyone.

If you wish to delete a recorded reading from your history, open the app and press the history button located at the top right-hand of the screen. When you find the reading you wish to delete, follow the following instructions based on the type of phone you have;

-For iPhone users, swipe the unwanted reading to the left then press the red "Delete" button.

-For Android users, press and hold the reading that you wish to delete and there will be a confirmation message, simply confirm to delete.

If you get a "Lo" reading on the display, this means one of two things;
-The batteries are low, so you will need a replacement.
-One or more of the batteries may have been installed incorrectly causing the scale to get a low battery reading.

If your scale is showing "Err", it could be for one of the following reasons;
-The max capacity of your scale is 400 lbs (181.4 kgs), it may present this display if overloaded.
-One or more of the sensors may have been damaged, please contact support for further assistance.

If your scale is not turning on sometimes when you tap on it, it may be for one of the following reasons;
-Please try stepping on it with more force as the scale requires at least 10 lbs (4.5kgs) to turn on.
-Please check the batteries to ensure that they are properly installed and/or replace them if needed.

If your body composition analysis is not displaying on your smartphone through the app, please check the following;
-Make sure you are barefoot, as your skin needs to make direct contact with the metal electrodes.
-Ensure that you stay standing on the scale until the body composition results are shown on the app and this happens after the weight is confirmed.

Tip: If your feet are dirty or heavily calloused, consider wiping your feet with a damp cloth before stepping on the scale to improve the contact between your feet and the metal electrodes.

Note: Please note that body composition only displays through the corresponding app via your smartphone and does not show on the display.
*If the problem persists, please contact support for further assistance.

If the scale is giving you different readings after consecutive uses, please check the following;
-Ensure that you have calibrated the scale since this could cause a 3-4 pound difference between readings.
-Ensure that it is placed on a hard and level surface, the scale will not work on carpet, mats or rubber flooring.
-Ensure that the conditions are the same for the user, things to consider are: drinking, eating, items in pockets, using the rest room, phone on hand, etc.
*Fun fact: 1 liter of water weighs 2.2 pounds or 1 kg so drinking or urinating will often cause a slight fluctuation.

If your scale is displaying a constantly moving weight without settling on a stable reading, this can be caused by one of the following;
-The floor may be unstable, please try using the scale on level flooring made of hardwood, concrete or tile.
-There may be something touching the scale or under the scale, please inspect the bottom and surrounding areas and try again.
-The user of the scale may be slightly unstable, please try remaining as stable as possible while weighing yourself.
-One or more of the sensors may have been damaged, please contact support for further assistance.