I-BA001 Series Instructions
Easy Setup Instructions
Step 1: Install the four AAA batteries included with your scale to power it on.
Step 2: Press the SET button 2 times until the “P0” profile is flashing. Use the selecting arrows for choosing “P1” to create your unique user profile and press “SET” to confirm.
Step 3: Select your Gender, Level of physical activity (10 hours or more per week = athlete), Age and Height with use of the selecting arrows and “SET” button for confirming each value.
Step 4: Place the scale on a flat, level and hard surface for use and be sure to allow the scale to Auto-Calibrate before its first use or anytime it is physically moved.
Congratulations, you are all set! Feel free to contact us if you have any questions.
FAQ
How do I change from lbs to kg?
In order to change the unit of measurement to “Metric” (Kilograms & Centimeters) or “Standard” (Pound & Inches) simply;
1. Tap the “SET” button to wake up your Body Fat Scale.
2. Change between the different Units of Measurement with the Down Arrow.
3. You are done!
Simply wait for the scale to turn off and the selected Unit of Measurement will automatically be saved for future uses.
How do I calibrate my scale?
If you wish to calibrate your scale, please follow the steps below;
1. Place the scale on a hard and level surface.
2. Briefly step on and off of the scale so that "0.0" is displayed on the scale.
3. The scale is ready for use!
*If the scale does not turn on, please make sure you are stepping on it with enough force as it requires at least 10 lbs (4.5 kgs) to turn on.
How do I connect my scale to my phone?
Please note that this model does not connect to a smartphone directly. If you wish to track your weight & body composition on a smartphone, you can do one of the following;
-Use the FREE Eros app to manually record your weight readings and keep a log of your progress.
-Please check out our Smart Body Fat Scales which connect directly with our app.
How can I track my body composition data?
Your Body Fat Scale will show all body composition metrics directly on the scale display. Most of our clients track their key metrics on a journal, excel sheet, take pictures of the display or use our FREE Eros app where they can manually enter their weight and body fat to create a manual log of their progress.
*For automatic progress tracking, please check out our Smart Body Fat Scales which sync directly with our app.
How can I delete, reset or overwrite a profile created?
If you would like to delete or reset a profile, you simply need to overwrite the profile. The profile may be overwritten by following the profile setup instructions.
What does it mean when my scale displays P0P1?
If "P0P1" is displayed this means that the scale was not able to identify your profile. Manually select your profile with the corresponding arrow or simply pre-select your profile prior to retaking your body composition analysis to ensure that you have the correct profile selected.
Why does my scale show "Lo"?
If you get a "Lo" reading on the display, this means one of two things;
-The batteries are low, so you will need a replacement.
-One or more of the batteries may have been installed incorrectly causing the scale to get a low battery reading.
Why is my scale showing "Err"?
If your scale is showing "Err", it could be for one of the following reasons;
-The max capacity of your scale is 400 lbs (181.4 kgs), it may present this display if overloaded.
-One or more of the sensors may have been damaged, please contact support for further assistance.
Why is my scale not turning on when I tap on it?
If your scale is not turning on sometimes when you tap on it, it may be for one of the following reasons;
-Please try stepping on it with more force as the scale requires at least 10 lbs (4.5kgs) to turn on.
-Please check the batteries to ensure that they are properly installed and/or replace them if needed.
Why doesn't the scale show my body composition?
If your body composition analysis is not displaying, please check the following;
-Make sure you are barefoot, as your skin needs to make direct contact with the metal electrodes.
-Ensure that you stay standing on the scale until the body composition results are shown on the display and this happens after the weight is confirmed.
Tip: If your feet are dirty or heavily calloused, consider wiping your feet with a damp cloth before stepping on the scale to improve the contact between your feet and the metal electrodes.
*If the problem persists, please contact support for further assistance.
Why does the scale give me a different weight reading when using it multiple times in a row?
If the scale is giving you different readings after consecutive uses, please check the following;
-Ensure that you have calibrated the scale since this could cause a 3-4 pound difference between readings.
-Ensure that it is placed on a hard and level surface, the scale will not work on carpet, mats or rubber flooring.
-Ensure that the conditions are the same for the user, things to consider are: drinking, eating, items in pockets, using the rest room, phone on hand, etc.
*Fun fact: 1 liter of water weighs 2.2 pounds or 1 kg so drinking or urinating will often cause a slight fluctuation.
Why does the weight keep moving without settling on a stable reading?
If your scale is displaying a constantly moving weight without settling on a stable reading, this can be caused by one of the following;
-The floor may be unstable, please try using the scale on level flooring made of hardwood, concrete or tile.
-There may be something touching the scale or under the scale, please inspect the bottom and surrounding areas and try again.
-The user of the scale may be slightly unstable, please try remaining as stable as possible while weighing yourself.
-One or more of the sensors may have been damaged, please contact support for further assistance.
